2000W CEP Fortress Waterproof MPPT Solar Generator Battery Box with Inverter, USB, 12V
97% of our customers enjoyed their order. 1183 orders.
The Cutting Edge Power FORTRESS is ready to protect your equipment with its waterproof and vandal resistant design! Perfect for permanent installations like trailers, boats, boat docks, etc.
Featuring a plug and play concept, the Fortress solar generator can be purchased with a battery, or you can use your own 12V battery. With inverter options up to 2000W, this solar generator can provide some serious power. All connections are made inside the box. Cable entry/exit can be made through dedicated cutouts on all four sides so NO DRILLING IS REQUIRED. Professionally wired in Houston, TX, all you need to do is connect the 5/16" battery ring terminals.
As with all waterproof electronic designs, heat can become an issue - Especially with a black box in the sun! But Cutting Edge Power has you covered with a temperature controlled fan that will cool off the internal components without draining the battery.
This device can also be used with 4S 12.8V lithium iron phosphate LiFePO4 batteries.
* Capable of handling up to 1,200W of solar panel MPPT charging (1200W @ 12V DC / 2400W @ 24V DC). * Pre-wired and ready to go: 5/16" ring battery terminals / MC4 Solar Panel connectors. No crimping, splicing, extra wiring needed. * Cable entry/exit points on all four sides. * Padlock latch to lock the box closed * Built-in short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection. * 12V Socket with 30A circuit breaker. * Big LCD display with all adjustable parameters. * Perfect for marine, boat dock, trailer, or any long term outdoor application. * Premium marine grade 200°C rated silicone insulated wire. * Assembled in USA, Enclosure made in USA. * Enclosure built for rugged environments with an impact resistance down to -20°F, and unaffected by acid, gas, oil, as well as, UV exposure.
* Maximum solar panel voltage input: 46VDC max for charging 24V battery, 23VDC max for charging 12V battery * Battery voltage (if equipped): 12V DC * Battery chemistry (if equipped): SLA Deep Cycle * Battery capacity (if equipped): 100Ah * Inverter voltage (if equipped): 110/120VAC * Charge controller working temperature: -31°F~140°F * Enclosure internal dimensions: * Enclosure external dimensions: 23.75"L x 12.50"W x 13.38"H